Hi and welcome back.
This is part 2 of my 3 part Portrait lighting post. Part 3 will be here probably next week when the images are back from my retoucher.
Part 2 is about the second half of my lighting workshop with Milford Photo and Phottix last Saturday.
During the second half of the day, we went to lighting with multiple lights, mixing speed lights with the new Phottix Indra 500 moonlight.
Phottix Indra 500
Phottix Mitros Plus Flash
Phottix Ares Trigger
Phottix 27″ Luna Dish
Phottix 36″ Silver Dish
In this first image, we did a simple two light commercial high key shot. I put Megan right up against a white background and used one light high and above and one light below for fill.
Key Above: Phottix Indra 500, 36″ Silver Beauty Dish with diffusion panel, Ares trigger
Fill Below: Nikon SB910, 27″ White Luna Beauty Dish with diffusion panel, Ares trigger
After this shot, we moved quickly to something more complicated.
I chose to use my lights more creatively this time, so my key and fill lights are all small so I can isolate parts of the image and keep light off of the background.
Key: Phottix Indra 500, Phottix 14 x 56 strip softbox with grid
Fill on front: Phottix Mitros Plus Speedlight, 27″ Luna Dish collapsed, Ares Trigger
Fill on hair/back: SB910, 27″ Luna Dish collapsed, Ares Trigger
Next, I was asked by an attendee to show how to mix natural light with modified light and make it look natural.
Our key light in this initial shot is just the diffused light coming in from the window.
Notice how the right side of the frame is dark.
To open the shadows on the right up and keep it natural looking, I simply bounced a speed light into the ceiling to add fill around the entire image. This was a quick adjustment at the end of the session, with a bit more time I would have dialed-in exposure. But this is a good example of adding light by just bouncing it around the room.
Here is a diagram of the setup.
I had set the speed light to manual mode at 1/2 power to illuminate the room behind Megan.
Well that’s it for today. Take a look at the images and diagrams to add this kind of work to your lighting. Getting creative can be as simple as bouncing light around the room or collapsing your modifier over your light.
Why buy expensive modifiers when you may already own what you need.
Till next time, happy Spring!